操作系統: CentOS 7.6
Kernel: 4.4
Kubernetes: v1.14.1
docker: 18.09 (支持 1.13.1, 17.03, 17.06, 17.09, 18.06, 18.09 )
Etcd: v3.3.12
Flannel: v0.11
cni-plugins: v0.7.5
Coredns: 1.4.0

架構示意圖

架構說明：

使用六臺主機，三臺Master節點, 三臺node節點
Master節點上部署的Kubernetes組件有kube-apiserver, kube-scheduler, kube-controller-manager,kube-proxy。部署網絡組件flannel,數據存儲集群Etcd.
Master的兩個高可用節點部署Haproxy和keepalived
Node 節點部署的Kubernetes組件有Kubelet,kube-proxy。 容器組件Docker,網絡組件Flannel
集群IP和主機名信息：

Master
master-1
192.168.20.44

Master
master-2
192.168.20.45

Master
master-3
192.168.20.46

Node
k8s-node-1
192.168.20.47

Node
k8s-node-2
192.168.20.48

Node
k8s-node-3
192.168.20.49

Ceph 需要一個可用的Ceph集群

系統初始化
1. 主機初始化

安裝好CentOS7的系統，做以下操作：

關閉firewalld，Selinux。
更新系統軟件包，執行yum update
安裝elrepo的源，更新內核為4.4或以上版本，并重啟生效
分別設置主機名為，并在本地hosts文件中解析。
安裝NTP服務
設置內核參數

設置內核參數的部分，要確認執行如下操作：

# 高可用Master節點設置內核參數
cat <<EOF >  /etc/sysctl.d/k8s.conf
net.ipv4.ip_nonlocal_bind = 1    
net.ipv4.ip_forward = 1
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
net.ipv4.ip_local_port_range = 10000 65000
fs.file-max = 2000000
net.ipv4.ip_forward = 1
vm.swappiness = 0
EOF

# 其他Master節點和計算節點設置內核參數
cat <<EOF >  /etc/sysctl.d/k8s.conf
net.ipv4.ip_forward = 1
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
net.ipv4.ip_local_port_range = 10000 65000
fs.file-max = 2000000
net.ipv4.ip_forward = 1
vm.swappiness = 0
EOF

2. 安裝Docker

由于在Kubernetes1.14的版本中，支持的版本有 1.13.1, 17.03, 17.06, 17.09, 18.06, 18.09，所以這里統一使用Docker 18.09。

下載docker-ce-18.09的rpm包和阿里云上對應的docker-ce.repo的源，在所有node節點上直接安裝：

mv docker-ce.repo /etc/yum.repos.d/
yum install docker-ce-18.09.5-3.el7.x86_64.rpm -y

在所有node節點啟動docker,并配置自啟動：

systemctl start docker
systemctl enable docker

3. 創建目錄

在所有主機上執行如下命令，創建所需目錄：

mkdir -p /opt/kubernetes/{cfg,bin,ssl,log}

4. 準備Kubernetes軟件包

從github下載kubernetes 1.14版本的二進制軟件包，下載地址: https://github.com/kubernetes/kubernetes/blob/master/CHANGELOG-1.14.md#server-binaries

下載如下軟件包：

[root@master-1 tmp]# ll
total 537520
-rw-r--r-- 1 root root 113938518 Jul 24 19:15 kubernetes-node-linux-amd64.tar.gz
-rw-r--r-- 1 root root 433740362 Jul 24 19:09 kubernetes-server-linux-amd64.tar.gz

解壓：

tar xf kubernetes-server-linux-amd64.tar.gz

5.準備etcd和flannel組件

從github下載etcd v3.3.12和flannel v0.11.0 :

wget https://github.com/etcd-io/etcd/releases/download/v3.3.12/etcd-v3.3.12-linux-amd64.tar.gz
wget https://github.com/coreos/flannel/releases/download/v0.11.0/flannel-v0.11.0-linux-amd64.tar.gz

制作CA證書

Kubernetes支持使用多種方式生成證書，可以使用easyrsa, openssl 或 cfssl任一一種生成。
參考鏈接

這里使用cfssl創建CA證書。

1.安裝CFSSL

使用cfssl生成CA證書需要單獨安裝cfssl。

[root@master-1 ~]# cd /usr/local/src/

curl -L https://pkg.cfssl.org/R1.2/cfssl_linux-amd64 -o /opt/kubernetes/bin/cfssl
curl -L https://pkg.cfssl.org/R1.2/cfssljson_linux-amd64 -o /opt/kubernetes/bin/cfssljson
curl -L https://pkg.cfssl.org/R1.2/cfssl-certinfo_linux-amd64 -o /opt/kubernetes/bin/cfssl-certinfo
chmod  x /opt/kubernetes/bin/*

所有節點添加Kubernetes的bin目錄到系統環境變量：

echo \\\'PATH=$PATH:/opt/kubernetes/bin\\\' >>/etc/profile
source /etc/profile

2.生成證書

創建需要的配置文件：

[root@master-1 ~]# cd /opt/kubernetes/ssl/
[root@master-1 ssl]# cfssl  print-defaults config > config.json
[root@master-1 ssl]# cfssl print-defaults csr > csr.json
[root@master-1 ssl]# ll
total 8
-rw-r--r-- 1 root root 567 Jul 26 00:05 config.json
-rw-r--r-- 1 root root 287 Jul 26 00:05 csr.json
[root@master-1 ssl]# mv config.json ca-config.json
[root@master-1 ssl]# mv csr.json  ca-csr.json

修改生成的文件為如下內容：
ca-config.json文件：

[root@master-1 ssl]# vim ca-config.json
{
  signing: {
    default: {
      expiry: 87600h
    },
    profiles: {
      kubernetes: {
        usages: [
            signing,
            key encipherment,
            server auth,
            client auth
        ],
        expiry: 87600h
      }
    }
  }
}

ca-csr.json文件：

[root@master-1 ssl]# vim ca-csr.json 
{
    CN: kubernetes,
    key: {
        algo: rsa,
        size: 2048
    },
    names: [
        {
          C: CN,
          ST: BeiJing,
          L: BeiJing,
          O: k8s,
          OU: System
        }
    ]
}

生成證書（ca-key.pem）和秘鑰(ca.pem):

[root@master-1 ssl]# cfssl gencert -initca ca-csr.json | cfssljson -bare ca
2018/07/26 00:27:00 [INFO] generating a new CA key and certificate from CSR
2018/07/26 00:27:00 [INFO] generate received request
2018/07/26 00:27:00 [INFO] received CSR
2018/07/26 00:27:00 [INFO] generating key: rsa-2048
2018/07/26 00:27:01 [INFO] encoded CSR
2018/07/26 00:27:01 [INFO] signed certificate with serial number 479065525331838190845576195908271097044538206777
[root@master-1 ssl]# ll
total 20
-rw-r--r-- 1 root root  386 Jul 26 00:16 ca-config.json
-rw-r--r-- 1 root root 1001 Jul 26 00:27 ca.csr
-rw-r--r-- 1 root root  255 Jul 26 00:20 ca-csr.json
-rw------- 1 root root 1679 Jul 26 00:27 ca-key.pem
-rw-r--r-- 1 root root 1359 Jul 26 00:27 ca.pem

分發證書到各個節點：

[root@master-1 ssl]# scp ca.csr ca.pem ca-key.pem ca-config.json 192.168.20.45:/opt/kubernetes/ssl
[root@master-1 ssl]# scp ca.csr ca.pem ca-key.pem ca-config.json 192.168.20.46:/opt/kubernetes/ssl
[root@master-1 ssl]# scp ca.csr ca.pem ca-key.pem ca-config.json 192.168.20.47:/opt/kubernetes/ssl
[root@master-1 ssl]# scp ca.csr ca.pem ca-key.pem ca-config.json 192.168.20.48:/opt/kubernetes/ssl
[root@master-1 ssl]# scp ca.csr ca.pem ca-key.pem ca-config.json 192.168.20.49:/opt/kubernetes/ssl

HA 節點部署

這里選擇兩個Master節點部署Haproxy 和 keepalived， keepalived上需要添加監控haproxy應用的腳本。

keepalived 配置

HA節點下載安裝keepalive:

yum install keepalived -y

配置兩個虛擬IP，一個用于k8s集群的apiserver代理，另一個用于nginx ingress入口（也可以單獨配置），同時要設置對haproxy的狀態判斷，如果節點上的haproxy進程結束需要自動切換VIP到另一節點上， 主HA配置如下：

# cat /etc/keepalived/keepalived.conf 
! Configuration File for keepalived

vrrp_script check_haproxy {
        script /etc/keepalived/check_haproxy.sh
        interval 3
        weight -20
}

vrrp_instance K8S {
    state backup 
    interface eth0
    virtual_router_id 44
    priority 200
    advert_int 5
    authentication {
        auth_type PASS
        auth_pass 1111
    }
    virtual_ipaddress {
        192.168.20.50
        192.168.20.60

    }
    track_script {
        check_haproxy
   }

}

從HA配置如下：

! Configuration File for keepalived

vrrp_script check_haproxy {
        script /etc/keepalived/check_haproxy.sh
        interval 3
        weight -20
}

vrrp_instance K8S {
    state backup
    interface eth0
    virtual_router_id 44
    priority 190
    advert_int 5
    authentication {
        auth_type PASS
        auth_pass 1111
    }
    virtual_ipaddress {
        192.168.20.50
        192.168.20.60

    }
    track_script {
        check_haproxy
   }
}

在這兩個節點上配置對應的監測腳本：

vim /etc/keepalived/check_haproxy.sh

#!/bin/bash
active_status=`netstat -lntp|grep haproxy|wc -l`
if [ $active_status -gt 0 ]; then
    exit 0
else
    exit 1
fi

需要添加權限

chmod  x /etc/keepalived/check_haproxy.sh

部署Haproxy

官方配置手冊

需要先確認已經配置了內核參數：

echo \\\'net.ipv4.ip_nonlocal_bind = 1\\\'>>/etc/sysctl.conf
echo \\\'net.ipv4.ip_forward = 1\\\'>>/etc/sysctl.conf

sysctl -p

安裝haproxy

yum install haproxy -y

配置haproxy, 我們?yōu)閗8s集群設計的VIP為 192.168.20.50，使用4層代理的方式， 配置文件如下：

# cat /etc/haproxy/haproxy.cfg |egrep -v ^#

global

    log         127.0.0.1 local2

    chroot      /var/lib/haproxy
    pidfile     /var/run/haproxy.pid
    maxconn     4000
    user        haproxy
    group       haproxy
    daemon

    # turn on stats unix socket
    stats socket /var/lib/haproxy/stats

defaults
    mode                    tcp           # 修改默認為四層代理
    log                     global
    option                  httplog
    option                  dontlognull
    option http-server-close
    option forwardfor       except 127.0.0.0/8
    option                  Redispatch
    retries                 3
    timeout http-request    10s
    timeout queue           1m
    timeout connect         10s
    timeout client          1m
    timeout server          1m
    timeout http-keep-alive 10s
    timeout check           10s
    maxconn                 3000

frontend  main 192.168.20.50:6443
    acl url_static       path_beg       -i /static /images /javascript /stylesheets
    acl url_static       path_end       -i .jpg .gif .png .css .js

    default_backend             k8s-node

backend k8s-node
    mode        tcp             # 修改為tcp
    balance     roundrobin
    server  k8s-node-1  192.168.20.44:6443 check     # 三個master主機
    server  k8s-node-2  192.168.20.45:6443 check
    server  k8s-node-3  192.168.20.46:6443 check

配置完成之后檢查IP是否可以自動切換。

部署ETCD集群
1.安裝etcd

執行如下命令，完成etcd的安裝：

[root@master-1 ~]# cd /tmp/
[root@master-1 tmp]# tar xf etcd-v3.3.12-linux-amd64.tar.gz 
[root@master-1 tmp]# cd etcd-v3.3.12-linux-amd64
[root@master-1 tmp]# cp etcd* /opt/kubernetes/bin/
[root@master-1 tmp]# scp etcd* 192.168.20.45:/opt/kubernetes/bin/
[root@master-1 tmp]# scp etcd* 192.168.20.46:/opt/kubernetes/bin/

2.生成etcd的專屬證書

1.創建etcd證書簽名請求

[root@master-1 ~]# vim etcd-csr.json
{
  CN: etcd,
  hosts: [
    127.0.0.1,
192.168.20.44,
192.168.20.45,
192.168.20.46
  ],
  key: {
    algo: rsa,
    size: 2048
  },
  names: [
    {
      C: CN,
      ST: BeiJing,
      L: BeiJing,
      O: k8s,
      OU: System
    }
  ]
}

2.生成etcd證書

[root@master-1 ~]# cfssl gencert -ca=/opt/kubernetes/ssl/ca.pem  \\\\
-ca-key=/opt/kubernetes/ssl/ca-key.pem  \\\\
-config=/opt/kubernetes/ssl/ca-config.json  \\\\
-profile=kubernetes etcd-csr.json | cfssljson -bare etcd

會生成如下文件：

[root@master-1 ~]# ll
total 16
-rw-r--r-- 1 root root 1062 Jul 26 01:18 etcd.csr
-rw-r--r-- 1 root root  287 Jul 26 00:50 etcd-csr.json
-rw------- 1 root root 1679 Jul 26 01:18 etcd-key.pem
-rw-r--r-- 1 root root 1436 Jul 26 01:18 etcd.pem

移動證書到ssl目錄：

[root@master-1 ~]#  cp etcd*.pem /opt/kubernetes/ssl
[root@master-1 ~]# scp etcd*.pem 192.168.20.45:/opt/kubernetes/ssl
[root@master-1 ~]# scp etcd*.pem 192.168.20.46:/opt/kubernetes/ssl

3.配置etcd

配置ETCD配置文件

master-1上的配置為：

[root@master-1 ~]# vim /opt/kubernetes/cfg/etcd.conf
#[member]
ETCD_NAME=etcd-node-1
ETCD_DATA_DIR=/var/lib/etcd/default.etcd
#ETCD_SNAPSHOT_COUNTER=10000
#ETCD_HEARTBEAT_INTERVAL=100
#ETCD_ELECTION_TIMEOUT=1000
ETCD_LISTEN_PEER_URLS=https://192.168.20.44:2380
ETCD_LISTEN_CLIENT_URLS=https://192.168.20.44:2379,https://127.0.0.1:2379
#ETCD_MAX_SNAPSHOTS=5
#ETCD_MAX_WALS=5
#ETCD_CORS=
#[cluster]
ETCD_INITIAL_ADVERTISE_PEER_URLS=https://192.168.20.44:2380
# if you use different ETCD_NAME (e.g. test),
# set ETCD_INITIAL_CLUSTER value for this name, i.e. test=http://...
ETCD_INITIAL_CLUSTER=etcd-node-1=https://192.168.20.44:2380,etcd-node-2=https://192.168.20.45:2380,etcd-node-3=https://192.168.20.46:2380
ETCD_INITIAL_CLUSTER_STATE=new
ETCD_INITIAL_CLUSTER_TOKEN=k8s-etcd-cluster
ETCD_ADVERTISE_CLIENT_URLS=https://192.168.20.44:2379
#[security]
CLIENT_CERT_AUTH=true
ETCD_CA_FILE=/opt/kubernetes/ssl/ca.pem
ETCD_CERT_FILE=/opt/kubernetes/ssl/etcd.pem
ETCD_KEY_FILE=/opt/kubernetes/ssl/etcd-key.pem
PEER_CLIENT_CERT_AUTH=true
ETCD_PEER_CA_FILE=/opt/kubernetes/ssl/ca.pem
ETCD_PEER_CERT_FILE=/opt/kubernetes/ssl/etcd.pem
ETCD_PEER_KEY_FILE=/opt/kubernetes/ssl/etcd-key.pem

master-2上的配置為：

[root@master-2 tmp]# vim /opt/kubernetes/cfg/etcd.conf
#[member]
ETCD_NAME=etcd-node-2
ETCD_DATA_DIR=/var/lib/etcd/default.etcd
#ETCD_SNAPSHOT_COUNTER=10000
#ETCD_HEARTBEAT_INTERVAL=100
#ETCD_ELECTION_TIMEOUT=1000
ETCD_LISTEN_PEER_URLS=https://192.168.20.45:2380
ETCD_LISTEN_CLIENT_URLS=https://192.168.20.45:2379,https://127.0.0.1:2379
#ETCD_MAX_SNAPSHOTS=5
#ETCD_MAX_WALS=5
#ETCD_CORS=
#[cluster]
ETCD_INITIAL_ADVERTISE_PEER_URLS=https://192.168.20.45:2380
# if you use different ETCD_NAME (e.g. test),
# set ETCD_INITIAL_CLUSTER value for this name, i.e. test=http://...
ETCD_INITIAL_CLUSTER=etcd-node-1=https://192.168.20.44:2380,etcd-node-2=https://192.168.20.45:2380,etcd-node-3=https://192.168.20.46:2380
ETCD_INITIAL_CLUSTER_STATE=new
ETCD_INITIAL_CLUSTER_TOKEN=k8s-etcd-cluster
ETCD_ADVERTISE_CLIENT_URLS=https://192.168.20.45:2379
#[security]
CLIENT_CERT_AUTH=true
ETCD_CA_FILE=/opt/kubernetes/ssl/ca.pem
ETCD_CERT_FILE=/opt/kubernetes/ssl/etcd.pem
ETCD_KEY_FILE=/opt/kubernetes/ssl/etcd-key.pem
PEER_CLIENT_CERT_AUTH=true
ETCD_PEER_CA_FILE=/opt/kubernetes/ssl/ca.pem
ETCD_PEER_CERT_FILE=/opt/kubernetes/ssl/etcd.pem
ETCD_PEER_KEY_FILE=/opt/kubernetes/ssl/etcd-key.pem

master-3上的配置為：

[root@master-3 ~]# vim /opt/kubernetes/cfg/etcd.conf
#[member]
ETCD_NAME=etcd-node-3
ETCD_DATA_DIR=/var/lib/etcd/default.etcd
#ETCD_SNAPSHOT_COUNTER=10000
#ETCD_HEARTBEAT_INTERVAL=100
#ETCD_ELECTION_TIMEOUT=1000
ETCD_LISTEN_PEER_URLS=https://192.168.20.46:2380
ETCD_LISTEN_CLIENT_URLS=https://192.168.20.46:2379,https://127.0.0.1:2379
#ETCD_MAX_SNAPSHOTS=5
#ETCD_MAX_WALS=5
#ETCD_CORS=
#[cluster]
ETCD_INITIAL_ADVERTISE_PEER_URLS=https://192.168.20.46:2380
# if you use different ETCD_NAME (e.g. test),
# set ETCD_INITIAL_CLUSTER value for this name, i.e. test=http://...
ETCD_INITIAL_CLUSTER=etcd-node-1=https://192.168.20.44:2380,etcd-node-2=https://192.168.20.45:2380,etcd-node-3=https://192.168.20.46:2380
ETCD_INITIAL_CLUSTER_STATE=new
ETCD_INITIAL_CLUSTER_TOKEN=k8s-etcd-cluster
ETCD_ADVERTISE_CLIENT_URLS=https://192.168.20.46:2379
#[security]
CLIENT_CERT_AUTH=true
ETCD_CA_FILE=/opt/kubernetes/ssl/ca.pem
ETCD_CERT_FILE=/opt/kubernetes/ssl/etcd.pem
ETCD_KEY_FILE=/opt/kubernetes/ssl/etcd-key.pem
PEER_CLIENT_CERT_AUTH=true
ETCD_PEER_CA_FILE=/opt/kubernetes/ssl/ca.pem
ETCD_PEER_CERT_FILE=/opt/kubernetes/ssl/etcd.pem
ETCD_PEER_KEY_FILE=/opt/kubernetes/ssl/etcd-key.pem

在三個節點上創建etcd的systemd文件：

[root@master-1 ~]# vim /usr/lib/systemd/system/etcd.service
[Unit]
Description=etcd
Documentation=https://github.com/coreos/etcd
Conflicts=etcd.service
Conflicts=etcd2.service

[Service]
Type=notify
Restart=always
RestartSec=5s
LimitNOFILE=40000
TimeoutStartSec=0
WorkingDirectory=/var/lib/etcd
EnvironmentFile=-/opt/kubernetes/cfg/etcd.conf
# set GOMAXPROCS to number of processors
ExecStart=/bin/bash -c GOMAXPROCS=$(nproc) /opt/kubernetes/bin/etcd

[Install]
WantedBy=multi-user.target

啟動ETCD服務,在三個節點執行如下命令:

mkdir /var/lib/etcd
systemctl daemon-reload
systemctl start etcd
systemctl enable etcd

確認所以節點的etcd服務啟動。

4.驗證集群

[root@master-1 ~]# etcdctl --endpoints=https://192.168.20.44:2379 \\\\
 --ca-file=/opt/kubernetes/ssl/ca.pem \\\\
 --cert-file=/opt/kubernetes/ssl/etcd.pem \\\\
 --key-file=/opt/kubernetes/ssl/etcd-key.pem cluster-health
member 32922a109cfe00b2 is healthy: got healthy result from https://192.168.20.46:2379
member 4fa519fdd3e64a84 is healthy: got healthy result from https://192.168.20.45:2379
member cab6e832332e8b2a is healthy: got healthy result from https://192.168.20.44:2379
cluster is healthy

Master節點部署
1.部署Kubernetes軟件包

[root@master-1 ~]# cd /tmp/kubernetes/server/bin/
[root@master-1 bin]# cp kube-apiserver /opt/kubernetes/bin/
[root@master-1 bin]# cp kube-controller-manager /opt/kubernetes/bin/
[root@master-1 bin]# cp kube-scheduler /opt/kubernetes/bin/

2.生成API Server的認證文件

參考鏈接

1.創建用于生成CSR的JSON文件，這里需要指定HA代理的IP，和集群的ClusterIP：

[root@master-1 ~]# cd /opt/kubernetes/ssl
[root@master-1 ssl]# vim kubernetes-csr.json
{
  CN: kubernetes,
  hosts: [
    127.0.0.1,
    192.168.20.50,
    10.1.0.1,
    kubernetes,
    kubernetes.default,
    kubernetes.default.svc,
    kubernetes.default.svc.cluster,
    kubernetes.default.svc.cluster.local
  ],
  key: {
    algo: rsa,
    size: 2048
  },
  names: [
    {
      C: CN,
      ST: BeiJing,
      L: BeiJing,
      O: k8s,
      OU: System
    }
  ]
}

2.生成Kubernetes的證書和私鑰

[root@master-1 ssl]# cfssl gencert -ca=/opt/kubernetes/ssl/ca.pem \\\\
   -ca-key=/opt/kubernetes/ssl/ca-key.pem \\\\
   -config=/opt/kubernetes/ssl/ca-config.json \\\\
   -profile=kubernetes kubernetes-csr.json | cfssljson -bare kubernetes

將私鑰分發到其它所有的node節點中：

[root@master-1 ssl]# scp kubernetes*.pem 192.168.20.46:/opt/kubernetes/ssl/
...

創建 API Server使用的token文件

[root@master-1 ~]# head -c 16 /dev/urandom | od -An -t x | tr -d \\\' \\\'
197f33fcbbfab2d15603dcc4408358f5
[root@master-1 ~]# vim /opt/kubernetes/ssl/bootstrap-token.csv
197f33fcbbfab2d15603dcc4408358f5,kubelet-bootstrap,10001,system:kubelet-bootstrap

創建基礎用戶名，密碼認證配置

[root@k8s-node-1 ~]#  vim /opt/kubernetes/ssl/basic-auth.csv
admin,admin,1
readonly,readonly,2

將ssl目錄的文件拷貝到其它的master節點上

scp -r -p /opt/kubernetes/ssl/*  k8s-node-1:/opt/kubernetes/ssl/
scp -r -p /opt/kubernetes/ssl/*  k8s-node-2:/opt/kubernetes/ssl/
scp -r -p /opt/kubernetes/ssl/*  k8s-node-3:/opt/kubernetes/ssl/

3.部署kube-apiserver

創建kube-apiserver的systemd文件

[root@k8s-node-1 ~]#  vim /usr/lib/systemd/system/kube-apiserver.service
[Unit]
Description=Kubernetes API Server
Documentation=https://github.com/GoogleCloudPlatform/kubernetes
After=network.target

[Service]
ExecStart=/opt/kubernetes/bin/kube-apiserver \\\\
  --enable-admission-plugins=MutatingAdmissionWebhook,ValidatingAdmissionWebhook,NamespaceLifecycle,LimitRanger,ServiceAccount,DefaultStorageClass,ResourceQuota,NodeRestriction \\\\
  --bind-address=192.168.20.44 \\\\
  --insecure-bind-address=127.0.0.1 \\\\
  --authorization-mode=Node,RBAC \\\\
  --runtime-config=rbac.authorization.k8s.io/v1 \\\\
  --kubelet-https=true \\\\
  --anonymous-auth=false \\\\
  --basic-auth-file=/opt/kubernetes/ssl/basic-auth.csv \\\\
  --enable-bootstrap-token-auth \\\\
  --token-auth-file=/opt/kubernetes/ssl/bootstrap-token.csv \\\\
  --service-cluster-ip-range=10.1.0.0/16 \\\\
  --service-node-port-range=20000-40000 \\\\
  --tls-cert-file=/opt/kubernetes/ssl/kubernetes.pem \\\\
  --tls-private-key-file=/opt/kubernetes/ssl/kubernetes-key.pem \\\\
  --client-ca-file=/opt/kubernetes/ssl/ca.pem \\\\
  --service-account-key-file=/opt/kubernetes/ssl/ca-key.pem \\\\
  --etcd-cafile=/opt/kubernetes/ssl/ca.pem \\\\
  --etcd-certfile=/opt/kubernetes/ssl/kubernetes.pem \\\\
  --etcd-keyfile=/opt/kubernetes/ssl/kubernetes-key.pem \\\\
  --etcd-servers=https://192.168.20.44:2379,https://192.168.20.45:2379,https://192.168.20.46:2379 \\\\
  --enable-swagger-ui=true \\\\
  --allow-privileged=true \\\\
  --audit-log-maxage=30 \\\\
  --audit-log-maxbackup=3 \\\\
  --audit-log-maxsize=100 \\\\
  --audit-log-path=/opt/kubernetes/log/api-audit.log \\\\
  --event-ttl=1h \\\\
  --v=2 \\\\
  --logtostderr=false \\\\
  --log-dir=/opt/kubernetes/log
Restart=on-failure
RestartSec=5
Type=notify
LimitNOFILE=65536

[Install]
WantedBy=multi-user.target

啟動kube-apiserver服務

[root@k8s-node-1 ~]# systemctl daemon-reload
[root@k8s-node-1 ~]# systemctl start kube-apiserver
[root@k8s-node-1 ~]# systemctl enable kube-apiserver

查看服務狀態是否正常

[root@master-1 ~]# systemctl status kube-apiserver
[root@master-1 ~]# netstat -lntp|grep kube-apiserver
tcp        0      0 192.168.20.44:6443      0.0.0.0:*               LISTEN      4289/kube-apiserver 
tcp        0      0 127.0.0.1:8080          0.0.0.0:*               LISTEN      4289/kube-apiserver 

4.部署controller-manager

生成controller-manager的systemd文件

[root@master-1 ~]# vim /usr/lib/systemd/system/kube-controller-manager.service
[Unit]
Description=Kubernetes Controller Manager
Documentation=https://github.com/GoogleCloudPlatform/kubernetes

[Service]
ExecStart=/opt/kubernetes/bin/kube-controller-manager \\\\
  --bind-address=127.0.0.1 \\\\
  --master=http://127.0.0.1:8080 \\\\
  --allocate-node-cidrs=true \\\\
  --service-cluster-ip-range=10.1.0.0/16 \\\\
  --cluster-cidr=10.2.0.0/16 \\\\
  --cluster-name=kubernetes \\\\
  --cluster-signing-cert-file=/opt/kubernetes/ssl/ca.pem \\\\
  --cluster-signing-key-file=/opt/kubernetes/ssl/ca-key.pem \\\\
  --service-account-private-key-file=/opt/kubernetes/ssl/ca-key.pem \\\\
  --root-ca-file=/opt/kubernetes/ssl/ca.pem \\\\
  --leader-elect=true \\\\
  --v=2 \\\\
  --logtostderr=false \\\\
  --log-dir=/opt/kubernetes/log

Restart=on-failure
RestartSec=5

[Install]
WantedBy=multi-user.target

啟動kube-controller-manager

[root@master-1 ~]# systemctl daemon-reload
[root@master-1 ~]# systemctl start kube-controller-manager
[root@master-1 ~]# systemctl enable kube-controller-manager

查看服務狀態

[root@master-1 ~]# systemctl status kube-controller-manager
[root@master-1 ~]# netstat -lntp|grep kube-con
tcp        0      0 127.0.0.1:10252         0.0.0.0:*               LISTEN      4390/kube-controlle 

5.部署Kubernetes Scheduler

創建systemd文件：

[root@master-1 ~]# vim /usr/lib/systemd/system/kube-scheduler.service
[Unit]
Description=Kubernetes Scheduler
Documentation=https://github.com/GoogleCloudPlatform/kubernetes

[Service]
ExecStart=/opt/kubernetes/bin/kube-scheduler \\\\
  --address=127.0.0.1 \\\\
  --master=http://127.0.0.1:8080 \\\\
  --leader-elect=true \\\\
  --v=2 \\\\
  --logtostderr=false \\\\
  --log-dir=/opt/kubernetes/log

Restart=on-failure
RestartSec=5

[Install]
WantedBy=multi-user.target

啟動服務

[root@master-1 ~]# systemctl daemon-reload
[root@master-1 ~]# systemctl start kube-scheduler
[root@master-1 ~]# systemctl enable kube-scheduler

查看服務狀態

[root@master-1 ~]# systemctl status kube-scheduler
[root@master-1 ~]# netstat -lntp|grep kube-scheduler
tcp        0      0 127.0.0.1:10251         0.0.0.0:*               LISTEN      4445/kube-scheduler

6. Master節點部署kube-proxy(可選)

(參見node節點部署部分，需要創建對應的kube-proxy家目錄)

7. 使用上述方式，配置master-1和master-2

將master-1上的ssl,cfg,bin 文件拷貝到其它master節點的對應位置。
配置各個服務的啟動文件，并啟動。

8.部署kubectl命令行工具

安裝二進制包

[root@master-1 ~]# cd /tmp/kubernetes/node/bin/
[root@master-1 bin]# cp kubectl /opt/kubernetes/bin/

2.創建admin證書簽名

[root@master-1 ~]# vim /opt/kubernetes/ssl/admin-csr.json
{
  CN: admin,
  hosts: [],
  key: {
    algo: rsa,
    size: 2048
  },
  names: [
    {
      C: CN,
      ST: BeiJing,
      L: BeiJing,
      O: system:masters,
      OU: System
    }
  ]
}

3.生成admin證書和私鑰

[root@master-1 ~]# cd /opt/kubernetes/ssl/
[root@master-1 ssl]# cfssl gencert -ca=/opt/kubernetes/ssl/ca.pem \\\\
   -ca-key=/opt/kubernetes/ssl/ca-key.pem \\\\
   -config=/opt/kubernetes/ssl/ca-config.json \\\\
   -profile=kubernetes admin-csr.json | cfssljson -bare admin

設置集群參數

[root@master-1 ~]#  kubectl config set-cluster kubernetes \\\\
    --certificate-authority=/opt/kubernetes/ssl/ca.pem \\\\
    --embed-certs=true \\\\
    --server=https://192.168.20.50:6443
Cluster kubernetes set.

5.設置客戶端認證參數：

[root@naster-1 ~]# kubectl config set-credentials admin \\\\
    --client-certificate=/opt/kubernetes/ssl/admin.pem \\\\
    --embed-certs=true \\\\
    --client-key=/opt/kubernetes/ssl/admin-key.pem
User admin set.

6.設置上下文參數

[root@master-1 ~]# kubectl config set-context kubernetes \\\\
    --cluster=kubernetes \\\\
    --user=admin
Context kubernetes created.

7.設置默認上下文：

[root@master-1 ~]# kubectl config use-context kubernetes
Switched to context kubernetes.

8.使用Kubectl工具查看當前狀態：

[root@master-1 ~]# kubectl get cs
NAME                 STATUS    MESSAGE             ERROR
scheduler            Healthy   ok                  
controller-manager   Healthy   ok                  
etcd-1               Healthy   {health:true}   
etcd-2               Healthy   {health:true}   
etcd-0               Healthy   {health:true}   

Node節點部署
1.安裝所需的服務

將kubernetes-node-linux-amd64.tar.gz壓縮包在node節點解壓，執行如下操作

[root@k8s-node-1 ~]# cd /tmp/kubernetes/node/bin
[root@k8s-node-1 bin]# cp kubelet kube-proxy  /opt/kubernetes/bin/
[root@k8s-node-1 bin]# scp kubelet kube-proxy  192.168.20.48:/opt/kubernetes/bin/
[root@k8s-node-1 bin]# scp kubelet kube-proxy  192.168.20.49:/opt/kubernetes/bin/

2.配置角色和認證參數

在master-1上創建角色綁定

[root@master-1 ~]# kubectl create clusterrolebinding kubelet-bootstrap --clusterrole=system:node-bootstrapper --user=kubelet-bootstrap
clusterrolebinding.rbac.authorization.k8s.io kubelet-bootstrap created

創建kubelet bootstrapping kubeconfig文件，設置集群參數

[root@master-1 ~]# kubectl config set-cluster kubernetes \\\\
   --certificate-authority=/opt/kubernetes/ssl/ca.pem \\\\
   --embed-certs=true \\\\
   --server=https://192.168.20.50:6443 \\\\
   --kubeconfig=bootstrap.kubeconfig
Cluster kubernetes set.

3.設置客戶端認證參數

[root@master-1 ~]# kubectl config set-credentials kubelet-bootstrap \\\\
   --token=197f33fcbbfab2d15603dcc4408358f5 \\\\
   --kubeconfig=bootstrap.kubeconfig   

User kubelet-bootstrap set.

4.設置上下文認證參數

[root@master-1 ~]# kubectl config set-context default \\\\
    --cluster=kubernetes \\\\
    --user=kubelet-bootstrap \\\\
    --kubeconfig=bootstrap.kubeconfig
Context default created.

5.選擇默認上下文

[root@master-1 ~]# kubectl config use-context default --kubeconfig=bootstrap.kubeconfig
Switched to context default

6.執行上面的操作后，會在當前目錄生成一個bootstrap.kubeconfig的config文件，將此文件分發到各節點：

[root@k8s-node-1 ~]# cp bootstrap.kubeconfig /opt/kubernetes/cfg/
[root@k8s-node-1 ~]# scp bootstrap.kubeconfig 192.168.20.47:/opt/kubernetes/cfg/
[root@k8s-node-1 ~]# scp bootstrap.kubeconfig 192.168.20.48:/opt/kubernetes/cfg/
[root@k8s-node-1 ~]# scp bootstrap.kubeconfig 192.168.20.49:/opt/kubernetes/cfg/

將master上更新的配置拷貝到其它master節點。

3.設置支持CNI

以下操作需要在所有node節點執行

設置Kubernetes對CNI的支持：

[root@k8s-node-2 ~]# mkdir -p /etc/cni/net.d
[root@k8s-node-2 ~]# vim /etc/cni/net.d/10-default.conf
{
        name: flannel,
        type: flannel,
        delegate: {
            bridge: docker0,
            isDefaultGateway: true,
            mtu: 1400
        }
}

4.配置Kubelet服務

以下操作需要在所有node節點執行

創建kubelet服務配置文件

[root@k8s-node-2 ~]# mkdir /var/lib/kubelet
[root@k8s-node-2 ~]# vim /usr/lib/systemd/system/kubelet.service
[Unit]
Description=Kubernetes Kubelet
Documentation=https://github.com/GoogleCloudPlatform/kubernetes
After=docker.service
Requires=docker.service

[Service]
WorkingDirectory=/var/lib/kubelet
ExecStart=/opt/kubernetes/bin/kubelet \\\\
  --address=192.168.20.48 \\\\
  --hostname-override=192.168.20.48 \\\\
  --pod-infra-container-image=mirrorgooglecontainers/pause-amd64:3.1 \\\\
  --experimental-bootstrap-kubeconfig=/opt/kubernetes/cfg/bootstrap.kubeconfig \\\\
  --kubeconfig=/opt/kubernetes/cfg/kubelet.kubeconfig \\\\
  --cert-dir=/opt/kubernetes/ssl \\\\
  --network-plugin=cni \\\\
  --cni-conf-dir=/etc/cni/net.d \\\\
  --cni-bin-dir=/opt/kubernetes/bin/cni \\\\
  --cluster-dns=10.1.0.2 \\\\
  --cluster-domain=cluster.local. \\\\
  --hairpin-mode hairpin-veth \\\\
  --allow-privileged=true \\\\
  --fail-swap-on=false \\\\
  --logtostderr=true \\\\
  --v=2 \\\\
  --logtostderr=false \\\\
  --log-dir=/opt/kubernetes/log
Restart=on-failure
RestartSec=5

[Install]
WantedBy=multi-user.target

啟動Kubelet

[root@k8s-node-2 ~]# systemctl daemon-reload
[root@k8s-node-2 ~]# systemctl start kubelet
[root@k8s-node-2 ~]# systemctl enable kubelet
[root@k8s-node-2 ~]# systemctl status kubelet

在master節點上查看是否收到node節點的csr請求：

[root@master-1 ~]# kubectl get csr
NAME                                                   AGE       REQUESTOR           CONDITION
node-csr-FDH7Y3rghf1WPsEJH2EYnofvOSeyHn2f-l_-4rH-LEk   2m        kubelet-bootstrap   Pending

批準kubelet的TLS請求

[root@master-1 ~]# kubectl get csr|grep \\\'Pending\\\' | awk \\\'NR>0{print $1}\\\'| xargs kubectl certificate approve
certificatesigningrequest.certificates.k8s.io node-csr-FDH7Y3rghf1WPsEJH2EYnofvOSeyHn2f-l_-4rH-LEk approved

[root@kmaster-1 ~]# kubectl get csr
NAME                                                   AGE       REQUESTOR           CONDITION
node-csr-FDH7Y3rghf1WPsEJH2EYnofvOSeyHn2f-l_-4rH-LEk   11m       kubelet-bootstrap   Approved,Issued

之后查看node節點狀態：

[root@master-1 ~]# kubectl get node
NAME            STATUS    ROLES     AGE       VERSION
192.168.20.48   Ready     <none>    35s       v1.14.1

node節點上查看kubelet 服務

[root@k8s-node-2 ~]# netstat -lntp|grep kubelet
tcp        0      0 127.0.0.1:10248         0.0.0.0:*               LISTEN      7917/kubelet        
tcp        0      0 192.168.20.32:10250     0.0.0.0:*               LISTEN      7917/kubelet        
tcp        0      0 192.168.20.32:10255     0.0.0.0:*               LISTEN      7917/kubelet        
tcp        0      0 192.168.20.32:4194      0.0.0.0:*               LISTEN      7917/kubelet     

5.部署kube-proxy

1.配置kube-proxy使用LVS，所有節點執行：

yum install -y ipvsadm ipset conntrack

2.創建證書請求

[root@master-1 ~]# vim kube-proxy-csr.json
{
  CN: system:kube-proxy,
  hosts: [],
  key: {
    algo: rsa,
    size: 2048
  },
  names: [
    {
      C: CN,
      ST: BeiJing,
      L: BeiJing,
      O: k8s,
      OU: System
    }
  ]
}

3.生成證書

[root@master-1 ~]#  cfssl gencert -ca=/opt/kubernetes/ssl/ca.pem \\\\
    -ca-key=/opt/kubernetes/ssl/ca-key.pem \\\\
    -config=/opt/kubernetes/ssl/ca-config.json \\\\
    -profile=kubernetes  kube-proxy-csr.json | cfssljson -bare kube-proxy

4.分發證書到所有node節點

[root@master-1 ~]# cp kube-proxy*.pem /opt/kubernetes/ssl/
[root@master-1 ~]# scp kube-proxy*.pem 192.168.20.47:/opt/kubernetes/ssl/
[root@master-1 ~]# scp kube-proxy*.pem 192.168.20.48:/opt/kubernetes/ssl/
[root@master-1 ~]# scp kube-proxy*.pem 192.168.20.49:/opt/kubernetes/ssl/

5.創建kube-proxy配置文件

[root@k8s-node-2 ~]# kubectl config set-cluster kubernetes  \\\\
  --certificate-authority=/opt/kubernetes/ssl/ca.pem   \\\\
  --embed-certs=true   \\\\
  --server=https://192.168.20.50:6443 \\\\
  --kubeconfig=kube-proxy.kubeconfig
Cluster kubernetes set.

6.創建kube-proxy用戶：

[root@k8s-node-2 ~]# kubectl config set-credentials kube-proxy \\\\
    --client-certificate=/opt/kubernetes/ssl/kube-proxy.pem \\\\
    --client-key=/opt/kubernetes/ssl/kube-proxy-key.pem \\\\
    --embed-certs=true \\\\
    --kubeconfig=kube-proxy.kubeconfig
User kube-proxy set.

7.設置默認上下文：

[root@k8s-node-2 ~]# kubectl config set-context default \\\\
    --cluster=kubernetes \\\\
    --user=kube-proxy \\\\
    --kubeconfig=kube-proxy.kubeconfig
Context default created.

8.切換上下文為default:

[root@k8s-node-2 ~]# kubectl config use-context default --kubeconfig=kube-proxy.kubeconfig
Switched to context default.

9.分發kube-proxy.kubeconfig配置文件到所有

[root@k8s-node-2 ~]# scp kube-proxy.kubeconfig 192.168.20.44:/opt/kubernetes/cfg/
[root@k8s-node-2 ~]# scp kube-proxy.kubeconfig 192.168.20.45:/opt/kubernetes/cfg/
[root@k8s-node-2 ~]# scp kube-proxy.kubeconfig 192.168.20.46:/opt/kubernetes/cfg/
[root@k8s-node-2 ~]# scp kube-proxy.kubeconfig 192.168.20.47:/opt/kubernetes/cfg/
[root@k8s-node-2 ~]# scp kube-proxy.kubeconfig 192.168.20.48:/opt/kubernetes/cfg/
[root@k8s-node-2 ~]# scp kube-proxy.kubeconfig 192.168.20.459/opt/kubernetes/cfg/

10.創建kube-proxy服務配置文件

所有節點執行，注意配置文件中IP需要修改為本機對應的IP

[root@k8s-node-1 ~]# mkdir /var/lib/kube-proxy
[root@k8s-node-1 ~]# vim /usr/lib/systemd/system/kube-proxy.service
[Unit]
Description=Kubernetes Kube-Proxy Server
Documentation=https://github.com/GoogleCloudPlatform/kubernetes
After=network.target

[Service]
WorkingDirectory=/var/lib/kube-proxy
ExecStart=/opt/kubernetes/bin/kube-proxy \\\\
  --bind-address=192.168.20.47 \\\\
  --hostname-override=192.168.20.47 \\\\
  --kubeconfig=/opt/kubernetes/cfg/kube-proxy.kubeconfig \\\\
  --masquerade-all \\\\
  --feature-gates=SupportIPVSProxyMode=true \\\\
  --proxy-mode=ipvs \\\\
  --ipvs-min-sync-period=5s \\\\
  --ipvs-sync-period=5s \\\\
  --ipvs-scheduler=rr \\\\
  --logtostderr=true \\\\
  --v=2 \\\\
  --logtostderr=false \\\\
  --log-dir=/opt/kubernetes/log

Restart=on-failure
RestartSec=5
LimitNOFILE=65536

[Install]
WantedBy=multi-user.target

11.啟動服務

systemctl start kube-proxy
systemctl enable kube-proxy
systemctl status kube-proxy

12.查看服務狀態,lvs狀態

[root@k8s-node-1 ~]# ipvsadm -L -n
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
  -> RemoteAddress:Port           Forward Weight ActiveConn InActConn
TCP  10.1.0.1:443 rr
  -> 192.168.20.44:6443           Masq    1      0          0         
  -> 192.168.20.45:6443           Masq    1      0          0         
  -> 192.168.20.46:6443           Masq    1      1          0  

所有node節點配置成功后可以看到如下結果：

[root@master-1 ~]# kubectl get node
NAME            STATUS   ROLES    AGE     VERSION
192.168.20.47   Ready    <none>   6d21h   v1.14.1
192.168.20.48   Ready    <none>   4d1h    v1.14.1
192.168.20.49   Ready    <none>   4d1h    v1.14.1

Flannel 網絡部署

所有節點都需要部署flannel。

1.創建Flannel證書

1.生成證書文件

[root@master-1 ~]# vim flanneld-csr.json
{
  CN: flanneld,
  hosts: [],
  key: {
    algo: rsa,
    size: 2048
  },
  names: [
    {
      C: CN,
      ST: BeiJing,
      L: BeiJing,
      O: k8s,
      OU: System
    }
  ]
}

2.生成證書

[root@master-1 ~]# cfssl gencert -ca=/opt/kubernetes/ssl/ca.pem \\\\
    -ca-key=/opt/kubernetes/ssl/ca-key.pem \\\\
    -config=/opt/kubernetes/ssl/ca-config.json \\\\
    -profile=kubernetes flanneld-csr.json | cfssljson -bare flanneld

3.分發證書

[root@master-1 ~]# cp flanneld*.pem /opt/kubernetes/ssl/
[root@master-1 ~]# scp flanneld*.pem {all-k8s-node}:/opt/kubernetes/ssl/

2.部署flannel

1.將之前下載的flannel壓縮包解壓，并分發到其它節點如下操作：

cp mk-docker-opts.sh flanneld /opt/kubernetes/bin/
scp mk-docker-opts.sh flanneld {all-k8s-node}:/opt/kubernetes/bin/

2.創建如下文件，分發到各個node節點：

[root@k8s-node-1 tmp]# vim remove-docker0.sh
#!/bin/bash
# Delete default docker bridge, so that docker can start with flannel network.

# exit on any error
set -e

rc=0
ip link show docker0 >/dev/null 2>&1 || rc=$?
if [[ $rc -eq 0 ]]; then
  ip link set dev docker0 down
  ip link delete docker0
fi

[root@k8s-node-1 tmp]# cp remove-docker0.sh /opt/kubernetes/bin/
[root@k8s-node-1 tmp]# scp remove-docker0.sh 192.168.20.48:/opt/kubernetes/bin/
[root@k8s-node-1 tmp]# scp remove-docker0.sh 192.168.20.49:/opt/kubernetes/bin/

3.配置flannel

[root@k8s-node-1 ~]# vim /opt/kubernetes/cfg/flannel
FLANNEL_ETCD=-etcd-endpoints=https://192.168.20.31:2379,https://192.168.20.32:2379,https://192.168.20.33:2379
FLANNEL_ETCD_KEY=-etcd-prefix=/kubernetes/network
FLANNEL_ETCD_CAFILE=--etcd-cafile=/opt/kubernetes/ssl/ca.pem
FLANNEL_ETCD_CERTFILE=--etcd-certfile=/opt/kubernetes/ssl/flanneld.pem
FLANNEL_ETCD_KEYFILE=--etcd-keyfile=/opt/kubernetes/ssl/flanneld-key.pem

創建flannel服務文件

[root@k8s-node-1 ~]# vim /usr/lib/systemd/system/flannel.service
[Unit]
Description=Flanneld overlay address etcd agent
After=network.target
Before=docker.service

[Service]
EnvironmentFile=-/opt/kubernetes/cfg/flannel
ExecStartPre=/opt/kubernetes/bin/remove-docker0.sh
ExecStart=/opt/kubernetes/bin/flanneld ${FLANNEL_ETCD} ${FLANNEL_ETCD_KEY} ${FLANNEL_ETCD_CAFILE} ${FLANNEL_ETCD_CERTFILE} ${FLANNEL_ETCD_KEYFILE}
ExecStartPost=/opt/kubernetes/bin/mk-docker-opts.sh -d /run/flannel/docker

Type=notify

[Install]
WantedBy=multi-user.target
RequiredBy=docker.service

5.分發創建的配置文件到各個節點：

scp /opt/kubernetes/cfg/flannel {all-k8s-node}:/opt/kubernetes/cfg/
scp /usr/lib/systemd/system/flannel.service {all-k8s-node}:/usr/lib/systemd/system/

3. Flannel CNI集成

1.下載CNI插件

wget https://github.com/containernetworking/plugins/releases/download/v0.7.5/cni-plugins-amd64-v0.7.5.tgz
[root@k8s-node-1 tmp]# mkdir /opt/kubernetes/bin/cni
[root@k8s-node-1 tmp]# tar xf cni-plugins-amd64-v0.7.5.tgz -C /opt/kubernetes/bin/cni

2.分發軟件到各個節點：

[root@k8s-node-1 ~]# scp -r /opt/kubernetes/bin/cni/* {all-k8s-node}:/opt/kubernetes/bin/cni/

3.在etcd中創建key

[root@master-1 ~]# /opt/kubernetes/bin/etcdctl --ca-file /opt/kubernetes/ssl/ca.pem --cert-file /opt/kubernetes/ssl/flanneld.pem --key-file /opt/kubernetes/ssl/flanneld-key.pem \\\\
     --no-sync -C https://192.168.20.44:2379,https://192.168.20.45:2379,https://192.168.20.46:2379 \\\\
     mk /kubernetes/network/config \\\'{ Network: 10.2.0.0/16, Backend: { Type: vxlan, VNI: 1 }}\\\' >/dev/null 2>&1

4.各個節點啟動flannel

[root@k8s-node-1 ~]# chmod  x /opt/kubernetes/bin/*
[root@k8s-node-1 ~]# systemctl daemon-reload
[root@k8s-node-1 ~]# systemctl start flannel 
[root@k8s-node-1 ~]# systemctl enable flannel 

配置Docker使用Flannel

1.修改docker的systemd的文件：

[Unit] #在Unit下面修改After和增加Requires
After=network-online.target firewalld.service flannel.service
Wants=network-online.target
Requires=flannel.service

[Service] #增加EnvironmentFile=-/run/flannel/docker
Type=notify
EnvironmentFile=-/run/flannel/docker
ExecStart=/usr/bin/dockerd $DOCKER_OPTS

2.其它NODE節點也做相同的修改

[root@k8s-node-2 ~]# scp /usr/lib/systemd/system/docker.service {k8s-node}:/usr/lib/systemd/system/

3.重啟docker, 出現docker0網卡，且在10.2.0.0/16網段，說明配置成功

[root@k8s-node-3 ~]# systemctl daemon-reload
[root@k8s-node-3 ~]# systemctl restart docker
[root@k8s-node-3 ~]# ip a| grep -A 3 \\\'docker0\\\'
7: docker0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN 
    link/ether 02:42:e9:2b:36:86 brd ff:ff:ff:ff:ff:ff
    inet 10.2.79.1/24 scope global docker0
       valid_lft forever preferred_lft forever

插件部署
1.創建CoreDNS

創建coredns.yaml，內容如下：

apiVersion: v1
kind: ServiceAccount
metadata:
  name: coredns
  namespace: kube-system
  labels:
      kubernetes.io/cluster-service: true
      addonmanager.kubernetes.io/mode: Reconcile
---
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRole
metadata:
  labels:
    kubernetes.io/bootstrapping: rbac-defaults
    addonmanager.kubernetes.io/mode: Reconcile
  name: system:coredns
rules:
- apiGroups:
  - 
  resources:
  - endpoints
  - services
  - pods
  - namespaces
  verbs:
  - list
  - watch
---
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRoleBinding
metadata:
  annotations:
    rbac.authorization.kubernetes.io/autoupdate: true
  labels:
    kubernetes.io/bootstrapping: rbac-defaults
    addonmanager.kubernetes.io/mode: EnsureExists
  name: system:coredns
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: ClusterRole
  name: system:coredns
subjects:
- kind: ServiceAccount
  name: coredns
  namespace: kube-system
---
apiVersion: v1
kind: ConfigMap
metadata:
  name: coredns
  namespace: kube-system
  labels:
      addonmanager.kubernetes.io/mode: EnsureExists
data:
  Corefile: |
    .:53 {
        errors
        health
        kubernetes cluster.local. in-addr.arpa ip6.arpa {
            pods insecure
            upstream
            fallthrough in-addr.arpa ip6.arpa
        }
        prometheus :9153
        proxy . /etc/resolv.conf
        cache 30
    }
---
apiVersion: extensions/v1beta1
kind: Deployment
metadata:
  name: coredns
  namespace: kube-system
  labels:
    k8s-app: coredns
    kubernetes.io/cluster-service: true
    addonmanager.kubernetes.io/mode: Reconcile
    kubernetes.io/name: CoreDNS
spec:
  replicas: 2
  strategy:
    type: RollingUpdate
    rollingUpdate:
      maxUnavailable: 1
  selector:
    matchLabels:
      k8s-app: coredns
  template:
    metadata:
      labels:
        k8s-app: coredns
    spec:
      serviceAccountName: coredns
      tolerations:
        - key: node-role.kubernetes.io/master
          effect: NoSchedule
        - key: CriticalAddonsOnly
          operator: Exists
      containers:
      - name: coredns
        image: coredns/coredns:1.4.0
        imagePullPolicy: IfNotPresent
        resources:
          limits:
            memory: 170Mi
          requests:
            cpu: 100m
            memory: 70Mi
        args: [ -conf, /etc/coredns/Corefile ]
        volumeMounts:
        - name: config-volume
          mountPath: /etc/coredns
        ports:
        - containerPort: 53
          name: dns
          protocol: UDP
        - containerPort: 53
          name: dns-tcp
          protocol: TCP
        livenessProbe:
          httpGet:
            path: /health
            port: 8080
            scheme: HTTP
          initialDelaySeconds: 60
          timeoutSeconds: 5
          successThreshold: 1
          failureThreshold: 5
      dnsPolicy: Default
      volumes:
        - name: config-volume
          configMap:
            name: coredns
            items:
            - key: Corefile
              path: Corefile
---
apiVersion: v1
kind: Service
metadata:
  name: coredns
  namespace: kube-system
  labels:
    k8s-app: coredns
    kubernetes.io/cluster-service: true
    addonmanager.kubernetes.io/mode: Reconcile
    kubernetes.io/name: CoreDNS
spec:
  selector:
    k8s-app: coredns
  clusterIP: 10.1.0.2
  ports:
  - name: dns
    port: 53
    protocol: UDP
  - name: dns-tcp
    port: 53
    protocol: TCP

執行此文件：

[root@master-1 tmp]# kubectl create -f coredns.yaml

確認DNS服務運行：

[root@master-1 ~]# kubectl get pod  -n kube-system  -o wide
NAME                                    READY   STATUS    RESTARTS   AGE    IP          NODE            NOMINATED NODE   READINESS GATES
coredns-76fcfc9f65-9fkfh                1/1     Running   2          3d7h   10.2.45.3   192.168.20.49   <none>           <none>
coredns-76fcfc9f65-zfplt                1/1     Running   1          3d6h   10.2.24.2   192.168.20.48   <none>           <none>

2. 部署Dashboard

1.執行目錄中的yaml,部署Dashboard:

[root@master-1 ~]# ll /tmp/dashboard/
total 20
-rw-r--r-- 1 root root  356 Jul 27 03:43 admin-user-sa-rbac.yaml
-rw-r--r-- 1 root root 4253 Jul 27 03:47 kubernetes-dashboard.yaml
-rw-r--r-- 1 root root  458 Jul 27 03:49 ui-admin-rbac.yaml
-rw-r--r-- 1 root root  477 Jul 27 03:50 ui-read-rbac.yaml

[root@master-1 ~]# kubectl create -f /tmp/dashboard/

2.確認服務是否正常運行：

[root@master-1 ~]# kubectl get pod -n kube-system
NAME                                    READY   STATUS    RESTARTS   AGE
coredns-76fcfc9f65-9fkfh                1/1     Running   2          3d7h
coredns-76fcfc9f65-zfplt                1/1     Running   1          3d6h
kubernetes-dashboard-68ddcc97fc-w4bxf   1/1     Running   1          3d2h

[root@master-1 ~]# kubectl cluster-info
Kubernetes master is running at https://192.168.20.50:6443
CoreDNS is running at https://192.168.20.50:6443/api/v1/namespaces/kube-system/services/coredns:dns/proxy
kubernetes-dashboard is running at https://192.168.20.50:6443/api/v1/namespaces/kube-system/services/https:kubernetes-dashboard:/proxy

To further debug and diagnose cluster problems, use \\\'kubectl cluster-info dump\\\'.

3.根據提示信息，使用dashboard的url,登錄，賬號admin/admin, 使用如下命令生成token:

[root@master-1 ~]# kubectl -n kube-system describe secret $(kubectl -n kube-system get secret | grep admin-user | awk \\\'{print $1}\\\')

4.復制token,選擇使用令牌的方式登錄：

3. Heapster 部署 (可選)

1.使用如下文件部署Heastper:

[root@master-1 ~]# ll heastper/
total 12
-rw-r--r-- 1 root root 2306 Jul 26 20:28 grafana.yaml
-rw-r--r-- 1 root root 1562 Jul 26 20:29 heapster.yaml
-rw-r--r-- 1 root root 1161 Jul 26 20:29 influxdb.yaml

[root@k8s-node-1 ~]# kubectl create -f heastper/

登錄dashboard，查看石頭出現資源利用率的圖表。

使用kubectl cluster-info命令，查看當前服務的url地址。

補充說明
etcd無證書配置說明

在實際的生產環境中，如果都是使用的內網環境，可以將etd集群配置為無證書的模式，這樣在配置和后續的故障恢復中會更簡單。
etcd無證書配置需要使用http訪問，安裝上述文檔，需要修改如下配置：

etcd的配置文件注釋掉安全證書部分，并將所有url改為http方式：

# cat /opt/kubernetes/cfg/etcd.conf
#[member]
ETCD_NAME=etcd-node-1
ETCD_DATA_DIR=/var/lib/etcd/default.etcd
#ETCD_SNAPSHOT_COUNTER=10000
#ETCD_HEARTBEAT_INTERVAL=100
#ETCD_ELECTION_TIMEOUT=1000
ETCD_LISTEN_PEER_URLS=http://192.168.20.31:2380
ETCD_LISTEN_CLIENT_URLS=http://192.168.20.31:2379
#ETCD_MAX_SNAPSHOTS=5
#ETCD_MAX_WALS=5
#ETCD_CORS=
#[cluster]
ETCD_INITIAL_ADVERTISE_PEER_URLS=http://192.168.20.31:2380
# if you use different ETCD_NAME (e.g. test),
# set ETCD_INITIAL_CLUSTER value for this name, i.e. test=http://...
ETCD_INITIAL_CLUSTER=etcd-node-1=http://192.168.20.31:2380,etcd-node-2=http://192.168.20.32:2380,etcd-node-3=http://192.168.20.33:2380
ETCD_INITIAL_CLUSTER_STATE=new
ETCD_INITIAL_CLUSTER_TOKEN=k8s-etcd-cluster
ETCD_ADVERTISE_CLIENT_URLS=http://192.168.20.31:2379
#[security]
#CLIENT_CERT_AUTH=true
#ETCD_CA_FILE=/opt/kubernetes/ssl/ca.pem
#ETCD_CERT_FILE=/opt/kubernetes/ssl/etcd.pem
#ETCD_KEY_FILE=/opt/kubernetes/ssl/etcd-key.pem
#PEER_CLIENT_CERT_AUTH=true
#ETCD_PEER_CA_FILE=/opt/kubernetes/ssl/ca.pem
#ETCD_PEER_CERT_FILE=/opt/kubernetes/ssl/etcd.pem
#ETCD_PEER_KEY_FILE=/opt/kubernetes/ssl/etcd-key.pem

fannel網絡部分注釋掉etcd的證書配置參數，并將URL該位http:

# cat /opt/kubernetes/cfg/flannel 

FLANNEL_ETCD=-etcd-endpoints=http://192.168.20.31:2379,http://192.168.20.32:2379,http://192.168.20.33:2379
FLANNEL_ETCD_KEY=-etcd-prefix=/kubernetes/network
#FLANNEL_ETCD_CAFILE=--etcd-cafile=/opt/kubernetes/ssl/ca.pem
#FLANNEL_ETCD_CERTFILE=--etcd-certfile=/opt/kubernetes/ssl/flanneld.pem
#FLANNEL_ETCD_KEYFILE=--etcd-keyfile=/opt/kubernetes/ssl/flanneld-key.pem

3.kube-apiserver中去掉etcd的證書配置，這個文件中需要把參數直接刪除，并將url改為http:

# cat /usr/lib/systemd/system/kube-apiserver.service
[Unit]
Description=Kubernetes API Server
Documentation=https://github.com/GoogleCloudPlatform/kubernetes
After=network.target

[Service]
ExecStart=/opt/kubernetes/bin/kube-apiserver \\\\
  --admission-control=NamespaceLifecycle,LimitRanger,ServiceAccount,DefaultStorageClass,ResourceQuota,NodeRestriction \\\\
  --bind-address=192.168.20.31 \\\\
  --insecure-bind-address=127.0.0.1 \\\\
  --authorization-mode=Node,RBAC \\\\
  --runtime-config=rbac.authorization.k8s.io/v1 \\\\
  --kubelet-https=true \\\\
  --anonymous-auth=false \\\\
  --basic-auth-file=/opt/kubernetes/ssl/basic-auth.csv \\\\
  --enable-bootstrap-token-auth \\\\
  --token-auth-file=/opt/kubernetes/ssl/bootstrap-token.csv \\\\
  --service-cluster-ip-range=10.1.0.0/16 \\\\
  --service-node-port-range=20000-40000 \\\\
  --tls-cert-file=/opt/kubernetes/ssl/kubernetes.pem \\\\
  --tls-private-key-file=/opt/kubernetes/ssl/kubernetes-key.pem \\\\
  --client-ca-file=/opt/kubernetes/ssl/ca.pem \\\\
  --service-account-key-file=/opt/kubernetes/ssl/ca-key.pem \\\\
  --etcd-servers=http://192.168.20.31:2379,http://192.168.20.32:2379,http://192.168.20.33:2379 \\\\
  --enable-swagger-ui=true \\\\
  --allow-privileged=true \\\\
  --audit-log-maxage=30 \\\\
  --audit-log-maxbackup=3 \\\\
  --audit-log-maxsize=100 \\\\
  --audit-log-path=/opt/kubernetes/log/api-audit.log \\\\
  --event-ttl=1h \\\\
  --v=2 \\\\
  --logtostderr=false \\\\
  --log-dir=/opt/kubernetes/log
Restart=on-failure
RestartSec=5
Type=notify
LimitNOFILE=65536

[Install]
WantedBy=multi-user.target

4.分別重啟flannel、kubelet、kube-apiserver等服務。

更多關于云服務器，域名注冊，虛擬主機的問題，請訪問西部數碼官網：www.ps-sw.cn





猜你還會喜歡下面的內容

• 一般企業郵箱容量是多少
• 雙十一虛擬主機購買優惠券去哪領
• 獨立IP云虛擬主機多少錢
• 多個網站買虛擬主機還是云服務器
• 云虛擬主機可以安裝寶塔嗎
• 常見的云虛擬主機有哪些
• 博客系統怎么在云虛擬主機安裝
• 辦網站沒有虛擬主機行嗎
• 便宜的云虛擬主機一定是好的嗎
• web怎么添加虛擬主機
• dv ssl怎么放入虛擬主機
• linux云虛擬主機如何ssl
• Java程序放在云虛擬主機嗎
• html云虛擬主機選什么系統好
• APP為什么不能用云虛擬主機
• wdcp怎么選云虛擬主機

熱門標簽

其他問題云服務器問題域名及賬戶問題企業郵局市場咨詢云服務器云建站/云站群/小程序虛擬主機網絡知識企業郵箱域名注冊域名備案域名商標注冊云主機更多標簽...

大家感興趣的內容

<cite id="eiiqe"></cite>